WorksitesConstruction & demolition
Plan welded mesh fence runs, delivery access and changes in direction.
Plan this setupWelded mesh temporary fencing
King Shield welded mesh panels, matching gates and the connections that complete your site boundary.
The system range
Start with our welded mesh panels. Complete the boundary with gates, supports and screens, or explore the wider barrier range.
Explore all systemsCore range · Site fencing
Welded mesh panels, with chain link and hoarding alternatives.
Explore this family
Welded mesh · Chain link · Hoarding
People & movement
Control queues, entrances and stage boundaries.
Explore this family
Crowd control · Stage boundaries
The complete setup
Connect the panels, supports and access points.
Explore this family
Gates · Feet · Couplers · Braces
Privacy & identity
Privacy, screening and a considered public face.
Explore this family
Privacy mesh · Printed covers
Featured system

King Shield · Welded mesh
Explore straight, round-corner and reinforced welded mesh panels. Compare mesh openings, frame details and galvanised finishes, then select the parts that complete the fence line.

Solid enclosure
Use solid infill to screen the work from the public side. Review wind exposure and ground conditions alongside the support and access arrangement.

Pedestrian routing
Lay out temporary queues, entrances and pedestrian channels. Match the connection style and foot arrangement to the route and surface.

Stage boundary
Coordinate the barrier line around the stage plan. Specify straight units, corners and access sections together so the proposed layout can be reviewed.
The complete setup
From welded panel to ground. Coordinate the mesh frame, feet, couplers and supports as one complete fence line.
Explore system componentsExplore the system

Welded mesh boundary
Start with the welded grid and steel frame. Select the panel height, mesh opening and reinforcement, then match the feet, couplers and access points.

Ground interface
Check the panel frame, available clearance and the bearing surface before choosing a compatible foot or base.

Connection
Match clamps to the panel frames. Include the connection arrangement for straight runs, corners and access transitions.

Support
Give the supplier the surface, exposure and screening details so the proposed support arrangement can be checked for the site.

Access
List the pedestrian and vehicle openings, required clear widths and operating space. Confirm compatible hinges, latches and other hardware.
Applications
Plan the perimeter around how the site will be used.
Explore applications
WorksitesPlan welded mesh fence runs, delivery access and changes in direction.
Plan this setup
Live events
Civil works
Public spaces
Sports venuesYour project, taking shape
Tell us about the site. Shape the boundary.
Build a scope you can review and share.
Manufacturing & quality
Review the specification, the connections and the packing plan together.

Review mesh openings, wire and tube sizes, panel dimensions and weld details against the agreed model.
Check the fit of feet, couplers, braces and gate hardware together.
Agree the coating, colour and inspection evidence for the selected series.
Confirm bundle contents, component counts and destination markings.
Project perspectives
Explore three illustrative layouts. See how the equipment, the route and the setting work together.

Worksite boundary
Plan the fence run, portable feet and the access points used for deliveries.
Explore the worksite layout
Event circulation
Confirm queue geometry, turns and where sections need to open for access.
Explore the event layout
Screened boundary
Specify artwork, coverage and fixings, then review the effect of added screening.
Explore cover optionsTechnical resources
Read about mesh and frames, fixings and supports, and access openings.
Visit the resource centre
Welded mesh · Selection guide
Compare panel height, wire size, mesh opening and frame reinforcement together. Choose a model and galvanised finish, then include feet, couplers, supports and gates in the same specification.

Installation note · English
Coverage, fabric openness and attachment points affect the proposed setup. Share the screen size, run length, ground surface and exposure before specifying the support arrangement.
Explore screens and covers
Access note · English
List the location, clear width and pedestrian or vehicle use of every opening. Add the operating clearance, hardware preferences and the connection to the adjacent fence panels.
Explore access componentsNews & insights
Practical perspectives on the boundary, the components and your next project.
News & updates
Project planning
Bring the panel format, fence length, gates and supporting components into one brief you can review and copy.
Try the selector
Product insight
Compare solid hoarding, privacy mesh and printed covers for the layout and exposure.
Explore screening
Procurement note
List feet, couplers, braces and gate hardware alongside the panels.
Review componentsProcurement FAQ
A clearer specification. A more complete brief.
Start with the questions that shape your order.
Selection & specification
Panels · Finishes · Screening
Specify the exposure and coating requirement. Ask which pre-galvanised and hot-dip galvanised options are available for the selected model, and request the relevant finish details.
Send the preferred colour reference or print artwork with the size and coverage. Review the chosen finish, attachment method and support arrangement for the project.
Scope & delivery
Components · Quotation · Packing
Provide the fence run or quantities, height, openings, ground conditions, finish and destination. A drawing or bill of quantities helps clarify what the order should include.
Give the destination, unloading constraints and marking requirements. Ask for the proposed bundle or pallet quantities for the selected models and components.
Bring your layout, quantities and destination.
Your next project
Share your layout, quantities and destination. Start a conversation about the right system and supply scope.
For drawings, quantities and your supply list.
Talk through the requirements with our team.
WhatsAppBuild your brief here. Send it from your email app.