Temporary chain link panels with tubular frames and steel bases in an industrial setting

The chain link panel series

An open boundary.
A defined structure.

Temporary chain link fence panels.
Woven mesh, tubular frames and connected bases. Choose the format around your site.

Woven diamond meshTubular steel framesSeparate bases & connections
Discover the construction

Inside the panel

Woven together. Framed for the site.

The diamond mesh is held within a tubular steel frame. Panel height, span and bracing distinguish the three formats; the bases and clamps complete the connection to the next panel.

Interwoven mesh.

Diamond-pattern chain link infill, with wire diameter and mesh opening specified at order stage.

A tubular perimeter.

Listed frame diameters run from Ø31.75 to Ø34.93 mm across the three panel models.

Bracing by format.

Choose a vertical-braced, cross-braced or taller dual-braced panel. Compare the actual dimensions below.

Chain link panel frames, mesh and bases along an illustrative work zone
Mesh · Frame · Ground interface

The three panel formats

Find your frame.

Explore the panel as a whole. Select a format to see its construction, listed dimensions and frame diameter.

Product view / Selected format6 by 12 foot nominal vertical-braced chain link panel
KC-TF-CL-P01

Vertical-braced.

The widest listed panel in this series, with a central vertical member dividing the span.

Listed width × height
3658 × 1798 mm
Frame tube diameter
Ø32 mm
Listed panel weight
20.87 kg
Nominal format
6′ × 12′

Nominal format is the model name. Use the listed metric dimensions for your selection. Bases and clamps are separate line items.

The specification, side by side

The measurements that matter.

Chain link model comparison. Listed dimensions in millimetres. Nominal foot labels are model names.
Panel specificationKC-TF-CL-P01Vertical-bracedKC-TF-CL-P02Cross-bracedKC-TF-CL-P03Dual-braced
Nominal format6′ × 12′6′ × 10′8′ × 10′
Listed width × height3658 × 1798 mm2921 × 1829 mm3048 × 2438 mm
Frame tube diameterØ32 mmØ31.75 mmØ34.93 mm
Panel weight20.87 kgTo confirm*26.3 kg
BracingCentral vertical memberCross-braced · Ø25.4 mm braceDual-braced format
Wire / mesh openingTo confirmTo confirmTo confirm
Finish specificationTo confirm by modelTo confirm by modelTo confirm by model

*The P02 standalone panel weight and included components require confirmation. Metric dimensions are rounded from the listed product data; the nominal foot labels do not replace these dimensions. Images may show separately supplied bases.

Request a model quotation

From one panel to the next

Complete the connection.

Specify the base and panel connection together. Match the frame interface, ground conditions and layout.

Steel tube base supporting a chain link panel
KC-TF-AC-FT06

Steel tube base.

762 × 457.2 × 304.8 mm.
A tubular base with two upright receivers for the panel connection.

Square-frame base with two upright receivers
KC-TF-AC-FT07

Square-frame base.

609.6 × 609.6 × 177.8 mm.
An alternative base format. Confirm fit and the supporting arrangement for the site.

Galvanised saddle clamp with bolts for adjoining panel tubes
PANEL CONNECTION

Clamps & hardware.

Clamp brackets, carriage bolts and nuts for adjoining frames. The final set and quantities follow the selected panel.

A clear supply scope.

Bases and connectors are requested as separate items unless the quotation explicitly includes them. Include opening widths and gate requirements in your layout; gate compatibility is confirmed with the complete system.

Chain link mesh and tubular frames in an outdoor application reference

Material & finish

Define what goes into the order.

Start with the published panel geometry. Then specify the mesh, coating and site conditions with the selected model.

LISTED DETAILS

Frame, format and bracing.

The three models have identified dimensions, frame diameters and bracing formats. The product descriptions specify galvanised steel tubing.

BY MODEL

Mesh and galvanising route.

Confirm wire diameter, mesh opening, tube wall thickness and the coating specification. Hot-dip availability and weld treatment require model-level confirmation.

ON REQUEST

Colour and screening.

Include any coating colour, PVC/PE finish or screen requirements. Availability and the effect of screening on support design need review before ordering.

Record your finish requirements

The site around the system

Plan the line. Keep the view.

Consider the routes, surface and exposure alongside the panel specification.

Illustrative chain link perimeter around a construction work zone
Boundary & access

Keep work zones visible.

Define the work boundary and the delivery openings. Include turning space, panel transitions and the ground surface in the layout.

Explore the application

Before you specify

A clearer brief starts here.

Ask about your project
Where are temporary chain link panels used?

Typical applications include construction boundaries, work zones, temporary storage yards and event perimeters. Share the intended use, pedestrian routes, access needs and exposure so the panel and support arrangement can be reviewed together.

Do the panels need holes in the ground?

The listed base formats use upright receivers for the panel frame. They provide a freestanding ground interface, but the complete support or anchoring arrangement depends on the surface, wind exposure and any screens. A base alone is not a site-specific stability assessment.

How do neighbouring panels connect?

Compatible bases receive the adjoining panel frame tubes, with clamp hardware connecting the frames. Confirm tube fit, clamp set, connection positions and quantities in the supply schedule.

Which finish should I request for outdoor use?

Specify the exposure, intended service conditions and required coating process. Galvanised tubing is described for the panels, while the exact galvanising route, wire finish and any PVC/PE option require confirmation for the model. No fixed corrosion life is stated here.

What changes with wind, screens or uneven ground?

Record the ground surface, slope, exposure and any attached screen or signage. These inputs inform the support, ballast or anchoring review. Use the site assessment guide to prepare the information; do not assume a standard base arrangement fits every site.

How should I plan transport and storage?

Panels and removable bases can be planned as separate handling units. Agree bundle contents, stacking and protection, unloading arrangements and delivery destination with the order. Request the packing schedule for the selected model and quantities.

From panel choice to project scope

Your fence line. Ready to specify.

Bring the models, quantities and connections into one request. Add your location and the details that shape the installation.

  • Configuration review
  • Itemised supply scope
  • Quotation preparation

Prepare an email draft or copy your requirements. Send from your email app, with your drawings or BOQ attached there.

Your selected scope0 items

    Review, copy or open an email draft. Nothing is sent from this page.

    Panel detail
    Selected chain link panel

    Bases and connection hardware are specified separately.

    Ask about this product

    Temporary Chain Link Fence Panels