Industry insights

Bulk Steel Crowd Control Barriers: Compare the Cost per Day in Use

Compare steel crowd control barriers on cost per deployed day when buying for a hire fleet. Include inspection, repair and replacement alongside the delivered price, using your own utilisation figures.

Why a Lifecycle Model for a Simple Barrier

Pedestrian channel barriers form walkways past roadworks, queue lanes at entrances and temporary routes through sites. They are bought in hundreds, moved constantly, struck by vehicles and plant, borrowed, lost and left out in all weather.

The Five Cost Elements

ElementWhat it includes
MaterialFrame or moulding, feet, connectors
FinishGalvanizing, powder coating, pigments and UV stabilisers
InspectionLabour to check barriers at the depot and on site
RepairStraightening, re-welding, coating repair, new feet and connectors
ReplacementNew units for those worn out, corroded, broken or lost

The Problem

Pedestrian channel barriers are galvanized, stacked tightly for transport, used along roads that are salted in winter, and returned to the yard wet. Each of these facts is harmless alone.

Sensitivity: Which Inputs Matter

Repair cost depends on design as much as on material: bolt-on feet and replaceable connectors turn a write-off into a repair.

Loss rate affects all options equally in percentage terms but penalises the dearer barrier in absolute terms.

Wet-Storage Stain

When zinc surfaces are held wet and close together, as between the tubes of nested barriers, the conditions for forming the protective layer are absent. Water is trapped, air cannot circulate, and the supply of carbon dioxide is cut off.

ConditionHow it arises with barriers
Water between closely fitting surfacesNested barriers; rain on stacks; washing before stacking
CondensationCold steel in warm, humid air; closed containers; plastic wraps
No air circulationTight stacks; stacks against walls; ground contact
Acidic or salty contaminationRoad salt, fertiliser, damp timber or cardboard

Packaging Controls for New Barriers

At the galvanizer: agree a passivation treatment for barriers that will be packed and shipped promptly; allow barriers to cool and dry before bundling.

Separation: timber battens, polymer strips or moulded spacers so that barrier faces do not touch over large areas; dry, untreated or neutral materials only.

Covers: where protection from rain is needed in transit, a cover over the top that is open at the sides and bottom.

Containers: load dry; use desiccant; avoid long dwell in hot, humid ports; unpack and open the stacks on arrival.

Storage Controls for the Fleet

RuleDetail
Rinse barriers returned from salted roads, coastal sites and showgroundsClean water at low pressure is sufficient; the aim is to remove soluble salts, not to scrub the zinc
Drain and dry before stackingStand upright or inclined with air flow; hollow sections drained through their holes
VentilateOpen-sided cover or well-ventilated building; no tarpaulins wrapped to the ground
Keep away from contaminantsNot stored against salt piles, fertiliser, fresh concrete or under dripping roofs
Rotate stockFirst in, first out, so that no stack stands wet and undisturbed for a season

How Zinc Normally Protects Itself

Freshly galvanized zinc exposed to freely circulating air reacts first with oxygen and moisture to form zinc oxide and zinc hydroxide, and then with carbon dioxide to form a thin, dense, adherent layer of basic zinc carbonate. This layer, the dull grey patina of weathered galvanizing, is what gives zinc its low corrosion rate. Its formation needs air, carbon dioxide and periods of drying.

Using the Model in Procurement

To apply the model, an owner needs five figures per barrier type from its own records: purchase cost, average retirement age, inspection hours per unit per year, repair cost per unit per year, and annual loss rate. Suppliers can then be asked for the data that supports their side of the model: coating type and thickness, the standard it is applied to, unit mass, replaceable parts and their prices, and any documented service life. Offers are compared on equivalent annual cost, or on cost per barrier-day at the owner's utilisation, with the purchase price shown as one line among five.

Acceptance on Delivery

It is nevertheless evidence of how the goods were packed and transported. A delivery inspection should record the presence and grade of staining, check coating thickness on the worst-affected items, and note whether spacers and ventilation were provided. Repeated staining on arrival is a packaging non-conformance to be raised with the supplier, even when each individual barrier is acceptable.

A worked comparison using your own prices

Suppose two offers each cover 1,000 deployed barrier-days. The first comes to 1,200 cost units after delivery and upkeep, the second to 1,150. That is 1.20 versus 1.15 per deployed day. Recalculate with your own service, transport and damage records before choosing.

Compare offers using the same deployment assumptions

For each offer, add the purchase price, delivery, planned inspection, repairs and replacements over the same period. Divide by the expected number of deployed barrier-days for the fleet. Run the comparison again at lower utilisation or with a higher repair allowance to see where the preferred buying decision changes.

Frequently asked questions

How should bulk crowd control barrier prices be compared?

Divide expected ownership and handling costs by projected barrier-days in service. Use the same utilisation and repair assumptions for each offer.

When is a lower purchase price likely to cost more in service?

Check how often the barriers need repairs and whether replacement feet and connectors fit the existing stock. Include resulting labour and downtime in the comparison.

Related product and planning information
Steel crowd control barriers · Quality control

Share this article