Industry insights

Product notes and practical reading for people selecting temporary fencing and barriers.
Browse articles ↓
Published articles · 24 · Showing 1–6

Industry insights
Ask suppliers to quote the same marked-up perimeter, including gates, bases, clamps, bracing and any screening. A panel-only price leaves the biggest differences in scope unanswered.

Industry insights
Choose the infill around the job and the fleet. Welded mesh gives the panel a rigid grid, while woven chain-link fabric flexes and relies on its ties and frame for support.

Industry insights
Specify a tested front-of-stage barrier assembly for positions exposed to audience pressure. Compare the proposed layout, ground conditions and joining details with the manufacturer's documented rating.

Industry insights
Order solid steel hoarding as a complete perimeter system. Sheet, frame, supports, connectors and gates belong on the same drawing because they all affect how the line transfers wind loads.

Industry insights
List each opening by the people or vehicles that use it, how often it opens and the clear width it has to provide. A gate's quoted frame size can differ from the usable opening.

Industry insights
Start with the event layout and mark the front-of-stage line, front-of-house (FOH) enclosure, queues and circulation routes separately. Each zone needs a barrier suited to its role, with quantities and inspection responsibilities on the same schedule.

Industry insights
Test replacement fence feet with the panels and clamps already in service. Socket fit, base mass and footprint determine whether the replacement works in the approved fence arrangement.
Industry insights
Choose braces and ballast trays that fit the approved stability layout and leave the pedestrian route clear. On a phased job, the crew also needs room to inspect, clean and relocate the supports.

Industry insights
Order fence clamps by actual frame-tube size and the joint they have to make. Check the shell fit and tightening method on your own panels before placing a bulk order.

Industry insights
Ask for the fabric, fixing method and screened-fence arrangement together. A fabric sample can confirm colour and coverage, while the fence design must account for the added wind load.

Industry insights
Compare steel crowd control barriers on cost per deployed day when buying for a hire fleet. Include inspection, repair and replacement alongside the delivered price, using your own utilisation figures.

Industry insights
Specify anti-climb mesh with the whole perimeter in view. Confirm the proposed panel geometry, ground clearance, compatible fittings and the limits of the installed configuration.

Industry insights
The word “galvanized” can describe different production routes. Confirm whether zinc was applied to the strip before forming or to the finished assembly, and ask how seams, cut edges and welds are protected.

Industry insights
Ask the supplier to link the steel mill certificate to the delivered batch. The stock labels, fabrication records and delivery note should let you trace the tested material to the actual fence panels.

Industry insights
Compare the clear mesh opening, wire pitch, frame tube and leg spacing as well as panel height and width. These dimensions affect how the panel handles and whether it fits the bases and clamps in your fleet.

Industry insights
Test the hook and eye using barriers from different production lots. A sound fit on a flat depot floor is a useful first check before reviewing the surface and layout at the venue.

Industry insights
Approve two things before ordering printed fence banners: a drawing that shows how the finished fabric fits the frame and a print sample that shows the artwork on the specified fabric.

Industry insights
Set acceptance checks before the order goes out. On delivery, use the approved drawing to identify misalignment, damaged joints, bowing and sharp edges, and record the lot before any affected stock is released.

Industry insights
For a bulk order of powder-coated barriers, ask which test was used, what was tested and how the results were classified. A rating without a method and a batch reference is difficult to use at acceptance.

Industry insights
Ask for evidence that covers the sheet fixing, the frame joints and the support arrangement in the submitted drawing. A test on an individual fastener answers a different question from a test on an assembled bay.

Industry insights
Agree which areas of a temporary gate will be inspected and how coating thickness and repairs will be documented. Pay particular attention to hinge brackets, latch posts and surfaces that rub during operation.

Industry insights
Request a site-specific bracing schedule for the actual chain-link fence layout, ground and attachments. A schedule for an open mesh run cannot be assumed to cover the same line with screens.

Industry insights
Check the fasteners, eyelets and hems before ordering replacement fabric. Damage at several adjacent points, repeated tears or movement of the fence merits a review of the complete screened line.

Industry insights
Buy pedestrian barriers as a compatible set of units, feet and connectors, then inspect the route as well as the hardware. The same schedule can guide spare stock and shift handover.